COLD & ORGANIC OIL PRESS MACHINE (NS-6500B)

Condition for Machine Installation:-

• For the oil plant’s type and seeds, quality and original content may be different in different areas.
• The day capacity (t/24h) is based on using a hot way to squeeze one time. I use the cold way to squeeze two or three times, the day capacity will be 1/2 or 1/3 timeless accordingly. The more the squeeze times are, the lower the capacity
• Actual capacity and oil percentage also depend on the operation done by the operator and seed character and types.
• The machine is already fitted the only motor is separate because of transportation issues for the installation of other parts and civil work includes motor fitting arranged by the customer as per guidance by the company.
• Gear oil, electric starter, wire, and tools have to arrange by the customer.
• Our Scope dose not include any Electrical connection/ Installation/ Erection/ Commissioning of Equipment. But in case your Required our Technical person to Support the customer Arrange for Accommodation, Food, & Travel expensive two-way. ( First priority Air ticket ).
• During site visits by the technician, all safety parameters are provided by the buyer and in case of any human damage or injury, all costs are borne by the buyer.
• The purchaser should commit to assist the vendor and work can begin immediately after the arrival engineer. The purchaser shall bear the costs of any delays that are not the fault of the vendor and also provide all necessary tools for installation.
• During the warranty period if any parts are damaged seller is only replacing the same parts free of cost delivery charges extra not change the whole machine if any technician is required for the fitting and site visit charges are extra After the warranty period seller provides spare parts and service as per the requirement with extra charges
• Insurance for transportation and factory will take by the buyer.
• Before purchasing a machine please read the operation manual of the machine carefully.

Condition for Demonstration:–

• If any customer required demonstration at our sites then they should pay following charges.
• Raw materials (seeds) charges (Max. capacity 50 kg. )
• Labor Cost
• Electricity Cost
• Any other cost at actually
• If the customer required a demo then a minimum of 5 days inform us in advance.
• Customers can bring their own material for the demo or we can provide it by purchasing from the local market. The customer will not be able to dispute if the material is not present.
• The demo will be given only on our available demo machine.
• The demo charge is refundable after buying a machine from us.
• One Year warranty in manufacturing defects only. (Motor, Heater, Electrical parts).