Oil Press Machine (NS-TC-600)

Description

“Best Oil Press Machine”

Operational manual:-

• Oil Press Machine NS-TC 600 is an extraordinary small machine that helps to improve the Health & Wealth of this human generation. This is a unique technology machine and can change the market scenarios in a big way.

Product Description:-

•  Multi-functional Home Oil Press Machine for Pressing like Peanuts, Coconut, Sesame, Soybean, Walnuts, Sunflowers seeds, Vegetable seeds, Flax seeds, Almond, Castor Seeds, Mustard seeds, and so on…
•  Machine Motor is an industry motor that can continue working for more than 4 hours. We suggest it works for 4 hours and take a rest for about 1 hour. That will be good for machines.
•  Oil extraction is up to 45%, which depends on the oil seed.
•  Easy to operate, clean, move, and store.

Working Capacity:-

(Take a few Examples of Seeds just for reference)

Working Process:-

• Turn on the heating switch and wait for matching the temperature as shown in Green Digit.
• When Green Digit and Red Digit Match then start the machine.
• Directly put dry ingredients.
• Press the “Squeezing ” switch and start pressing the oil.
• After pressing ends, hold (don’t loosen) the “Cleanup” switch for more than 20 seconds, and it will be easier to remove the screw and then clean, If you don’t press the cleanup switch when pressing chamber becomes cold, the interior residual slag harden and pressing rod will be blocked in the pressing chamber and cannot be taken out for cleaning.
• In case of power out it during the process, please turn off the start switch, and unplug the power plug at the same time, continue to press after turning on the heating switch for more than 10 minutes when power is connected.
• Clean: remove the pressing chamber and clean it with edible detergent and water.
• Pull out the power plug and store the machine in a dry place.
• The pressed oil will automatically separate after storing for a night under room temperature 15 degrees above and does not need to filter.
• In the process, sometimes material from the aerial state in the feeding port because raw materials are damp, or the surface is not smooth, you can gently touch the raw materials.

Notice: Never put a finger or hard objects such as a metal bar into the entrance to the chamber to stir raw materials.

Cleaning Process:–

• First, shut off the power and power plug, then pressing chamber remains heat, wear cotton heat-protective gloves show as to prevent burns, or wait for more than 30 minutes so as to let the pressing chamber cools down completely.
• Take out the pressing rod and clean it with paper or cloth, rinse and clean the pressing chamber with water.
• Never clean with acid, alkali, soda, and salt water, the more raw material moisture content is, the tighter the raw material slag sticks to screws, more difficult it is to wash, and you can cut it off with a knife, in addition to pressing chamber, other parts are forbidden to enter water or other liquid, after cleaning promptly wipe or blow the water on pressing chamber with a hair dryer before storing.

Some Types Of Seed that will Press by Machine:-

(For Reference)

• 

  Peanuts
• 

  Sunflower seeds
• 

  Soybeans Seed
• 

  Seasame
• 

  Safflower
• 

  Mustard seeds
• 

  Flaxseeds
• 

  Coconut
• 

  Castor Seeds
• 

  Almond